KAT Controls Spark Tester consists of a High Voltage Electrode unit and an Electronic Control Unit which has a highly reliable solid state structure and requires minimal maintenance.
Ball chain assembly used in H.V. Electrode Unit which is in direct contact with some surface of the cable under test and combines with the resulting corona in H.F. Spark testers to form an extremely effective contact zone around the cable insulation.
This unique feature ensures that the actual voltage displayed on kV meter is applied accurately and consistently to the cable surface even if the bead chain do not touch the cable from all sides. A pre-adjusted and extremely sensitive fault detection circuit detects all the faults (pin holes) in the cable insulation at proper voltage setting. These spark tester are able to detect all the faults which are otherwise detected in water immersion testing of cables.
The interlock with the electrode unit cover protects the operator from accidental contact with the electrode.
|HF Testers with Analog Indications||MF Testers with Digital Indications||DC Testers with Analog Indications||HF Testers with digital indications|
|Model ST -10 – 0.5 kV to 10 kV AC rms at 3 kHz =/- 0.5 kHz Sine wave||Model STA -15 – 0.5 kV to 15 kV AC rms at 50 Hz||Model STD -10 – 0.5 kV to 10 kV DC||Model KST -10 – 0.5 kV to 10 kV AC rms at 3 kHz =/- 0.5 kHz Sine wave|
|Model ST -15 – 0.5 kV to 15 kV AC rms 3 kHz =/- 0.5 kHz Sine wave||Model STA -25 – 0.5 kV to 25 kV AC rms at 50 Hz||Model ST – TW – 10 – 0.5 kV to 10 kV DC with 10 / 11 pair group Twinner Electrode||Model KST -15 – 0.5 kV to 15 kV AC rms 3 kHz =/- 0.5 kHz Sine wave|
|Model STA – 30 – 0.5 kV to 30 kV AC rms at 50 Hz|
Types of Spark Testers
- AC High Frequency Spark Testers
- AC Mains Frequency Spark Testers
- DC Spark Testers
Types of Electrodes
- Ball Chain Electrode
- Twinner Electrode for multi pair application