Spark Tester Calibrator

For Spark Testing with constant and comparable sensitivity on insulating, winding and sheathing lines, it is very essential to calibrate the spark tester with a spark tester calibrator.

KAT Controls make Spark Tester Calibrator Model STCAL-2K is designed to meet the requirements of relevant Indian and international standards for Spark Testers. One can measure the test voltage and it’s frequency with the help of Spark Tester Calibrator.

Incorporating Digital Voltmeter, this versatile Calibrator is used for both Voltage Calibration and measurement of Fault detection sensitivity of various makes and type of spark testers.

Measurement and display circuits for :

  • Test Voltages up to 15 kV RMS for AC High Frequency Spark Testers
  • 30 kV RMS / DC for AC Mains Frequency / DC Spark Testers resp
  • Test Voltage Frequency upto 4000 Hz

Artificial fault device

  • Checks the sensitivity to ‘faults’ according to IS:10810 (part 44) – 1984, BSEN 50356:2002

Type of measurements for test voltage and short circuit current

  • Average
  • RMS
  • Positive and Negative Peak Value

Technical Specifications : 
General

Parameter Specifications
Mechanical Dimensions 490 x 270 x 280 mm
Total weight of Calibrator 15 kg
Input 1 Phase, 230 VAC + 10%, 50 Hz + 2 Hz
Power Rating 300 VA

Technical Specifications : 
For measurements of test voltage

Parameter Specifications
Input impedance 100 M for AC mains frequency & DC Spark Testers
40 M for AC High Frequency Spark Testers.
Max. Test Voltage 15 kV at max. 4000 Hz for AC high frequency spark testers
30 kV RMS / DC for AC mains frequency / DC spark testers

Technical Specifications :
For Artificial fault device

Parameter Specifications
Max. operating voltage 3 kV AC RMS for AC High frequency & Mains frequency Spark testers
5 kV DC for DC Spark testers
Fault Rate 1 per second with 50 Hz mains frequency
Spark Gap 0.25mm + 0.05 mm for a period of 0.0025 second once per second
Max. fault current 600 µA at 3 kV when spark gap is temporarily shorted
Input 1 phase, 230 V AC + 10%, 50/60 Hz + 2 Hz

View/Download Product Brochure

*Note: As we are continuously doing the development and upgradation of our products, the specifications mentioned above are subject to change without prior notice.